Replace ageing lighting
Two older tube shed lights, a reflector-style globe beside the security door, and a worn switch mechanism and mounting block needed attention.
Two 1200 mm LED battens replaced older shed tube lights. Russo Electrical also replaced an outdoor reflector-style globe beside the security door and renewed a switch mechanism and mounting block.

Two older tube shed lights, a reflector-style globe beside the security door, and a worn switch mechanism and mounting block needed attention.
Installed in the existing shed light positions along the timber beams, with the outdoor globe and switch components replaced.
Enclosed-diffuser LED battens now illuminate the shed workbench and shelves, and the replacement entry globe is shown lit.
Russo Electrical replaced two older tube light fittings in a backyard shed with 1200 mm LED battens, then completed an outdoor globe replacement and a light switch repair at the same property.
The shed relied on older tube fittings above the workbench and storage shelves. The light beside the security door needed a new reflector-style globe, and a switch needed a replacement mechanism and mounting block.
The owners needed several existing fittings updated rather than a new lighting layout. The work involved maintaining lighting in the shed and addressing the globe and switch beside the entry.
The work was to remove the two older tube fittings and install two 1200 mm LED battens along the same timber beams, replace the outdoor reflector-style globe, and renew the switch mechanism and mounting block.
Our electricians removed the two tube fittings and installed 1200 mm LED battens in the same locations so light continued to fall over the bench and shelves. Outside, they replaced the reflector-style globe beside the security door, along with the switch mechanism and mounting block.
The shed now has two LED battens with enclosed diffusers instead of the old tube fittings. The before-and-after photographs show the new shed lights illuminating the workbench and shelving and the replacement outdoor globe lit beneath the covered entry.
This Wareemba project addressed ageing lighting fittings and small electrical maintenance items without changing the shed’s established light positions. If your shed or exterior lighting needs attention, our Wareemba electrician team can assess the job and quote the agreed work.
See more real projects in our residential electrical case studies, including garage LED batten replacements in Drummoyne.
The two 1200 mm LED battens were installed where the older shed fittings had been mounted, continuing to illuminate the workbench and storage shelves below.

Outside, Russo Electrical replaced the reflector-style globe in the light beside the security door. The comparison image shows the existing globe before the work and the replacement illuminated beneath the covered entry.

The light switch mechanism and its mounting block were also replaced as part of this Wareemba maintenance visit.
Two 1200 mm LED battens with enclosed diffusers replaced the existing older tube light fittings.
Yes. Both were installed along the timber beams in the same spots as the old fittings, keeping the workbench and storage areas illuminated.
The reflector-style globe in the fitting beside the security door was replaced. The supplied project notes do not describe replacing the whole fitting.
Russo Electrical replaced the switch mechanism and its mounting block.
One comparison documents the shed’s tube fittings and new LED battens. The second documents the outdoor reflector-style globe before replacement and the new globe illuminated.
This project combined shed lighting replacement, an outdoor globe replacement and switch repairs. Request a booking to discuss the work required at your property.
Contact Russo Electrical for a quote on shed lighting, LED batten replacements, outdoor globes or switch repairs. Call 0485 009 500.