Equivalent fan replacement
Assess the existing 240 V inline ventilation fan and quote an equivalent replacement for the ducted system, subject to the strata approval process.
A new inline subfloor fan with an updated control arrangement. Russo Electrical replaced an existing 240 V ducted ventilation fan with a premium 150 mm inline exhaust fan. During installation, an additional fault was found in the existing timer and a smart switch was added.

Assess the existing 240 V inline ventilation fan and quote an equivalent replacement for the ducted system, subject to the strata approval process.
Installed a premium 150 mm inline exhaust fan connected to the flexible ducting. A failed timer was identified and a smart switch was added.
The new fan and updated wardrobe switch arrangement are shown in the completed project photos.
An Annandale homeowner needed an equivalent replacement for their existing ducted subfloor ventilation fan. Russo Electrical supplied and installed a premium 150 mm inline unit and addressed a failed timer found during the job.
The property had a 240 V inline subfloor fan connected to ducting and operated using a digital timer and a three-speed wall control inside a wardrobe. The owner wanted an equivalent replacement, while retaining the existing ducted ventilation arrangement.
The owner contacted Russo Electrical for a supply-and-install quote. Our electrician attended on 9 October 2026 to assess the existing equipment, with the replacement quoted for strata approval before the installation was arranged.
The proposed work was to supply and install a premium 150 mm inline exhaust fan to replace the existing unit, connecting the new fan to the existing flexible ducting. The scope focused on the subfloor ventilation system and its controls.
Russo Electrical returned on 26 October 2026 and installed the replacement inline fan. During the work, our electrician also found that the existing timer had failed. A smart switch was added to the job, and the supplied control photos document the old rotary control being replaced by a single-button switch.
The job was recorded as completed on 26 October 2026. The after photo shows the replacement fan connected to flexible ducting, while the control photo documents the updated switch arrangement in the wardrobe. No measured airflow result or client testimonial was supplied.
Checking the complete ventilation setup uncovered an additional timer fault during replacement. When replacing a subfloor fan, assessing the associated controls can help identify other components needing attention.
The supplied project image shows the original fan and the new inline fan fitted to the ducting.

A premium 150 mm inline exhaust fan was installed to replace the existing ducted subfloor ventilation fan.
Yes. The documented work involved connecting the new inline fan to the flexible ducting.
The existing timer was found to have failed, so a smart switch was added to the job. The control photograph shows a single-button replacement arrangement.
The replacement was quoted for strata approval before installation was arranged. The supplied notes do not record the details of the approval decision.
The electrician first attended on 9 October 2026, and the replacement job was recorded as completed on 26 October 2026.
Learn about Sydney subfloor ventilation services or request a booking to discuss your existing fan and controls.
Facing something similar? Contact Russo Electrical for a quote and discuss your fan, ducting and controls.