Upgrade the existing fuse board
Upgrade the original fuse switchboard as part of a wider electrical job at the Abbotsford property.
01 · The customer problem
An existing fuse switchboard needed upgrading
The property had an existing fuse switchboard that was scheduled for replacement as part of a wider electrical job. The work called for a more modern load centre with individual safety devices for the key household circuits.
The available job details do not record a specific fault, customer concern or emergency, so this case study focuses on the documented switchboard work.
02 · Why they called Russo
Russo Electrical was engaged for the switchboard replacement
Russo Electrical was tasked with upgrading the fuse switchboard in Abbotsford. The customer’s referral source and reasons for choosing Russo were not recorded in the supplied job notes.
03 · What Russo proposed
An enclosed load centre with circuit-by-circuit safety devices
The documented upgrade involved replacing the original fuse switchboard with a white enclosed switchboard load centre, using a Hager main switch and individual electrocution safety devices (RCBOs).
Hager main switch
A Hager main switch was fitted as part of the replacement switchboard.
Individual RCBO protection
Separate RCBOs were installed for the lighting, power, hot water and stove circuits.
04 · The process
Removing the fuse board and fitting the replacement
The existing fuse switchboard was removed and replaced with the new enclosed load centre. The Hager main switch and individual RCBOs were fitted, and the completed board was identified with clear circuit labels.
The after photograph shows the finished switchboard and its hinged protective cover. The supplied record does not specify the installation timeframe or any unexpected findings.
05 · The outcome
A labelled switchboard with a hinged protective cover
The upgraded switchboard has dedicated, labelled RCBOs for the lighting, power, hot water and stove circuits, housed inside a white enclosed load centre with a hinged protective cover.
These are the visible and recorded outcomes of the work. No customer testimonial was supplied, so none has been attributed to the homeowner.
06 · The takeaway
Switchboard upgrades are about the details
A successful switchboard replacement is more than changing the enclosure: the layout, individual circuit protection, labelling and cover are all important parts of the finished installation.
If you’re considering replacing an older fuse board, learn more about switchboard upgrades or contact Russo Electrical to discuss your property.