Exact model details
Send the model number or specification sheet so the connection method and maximum demand can be reviewed.
Induction cooktop installation Sydney
5.0 Star Rating | 217+ Reviews
Induction cooktop circuits, connection and electrical testing
Russo Electrical checks your cooktop specifications and switchboard capacity before installing the required circuit, protection and isolation. We then connect and test the appliance once the benchtop and cabinetry are ready.
Book Quote Now
Online Now
5.0 Star Rating | 217+ Reviews
Before installation
Check the appliance and the home together
Cooktop requirements vary by model. The rating plate and manufacturer instructions determine the electrical design, while the existing switchboard and wiring determine what the home can safely support.
Switchboard capacity
We check the available supply, circuit protection and space before recommending the final scope.
Existing circuit
An old cooktop circuit is not automatically suitable. Cable size, protection, condition and installation method need checking.
Isolation
The appliance must have suitable isolation arranged for the model and installation in accordance with applicable requirements.
Benchtop and cabinetry
The opening, clearances and ventilation must match the manufacturer's installation instructions.
Gas removal
If a gas cooktop is being replaced, disconnection and capping must be completed by a licensed gasfitter.
Electrical installation scope
What Russo Electrical can complete
The final scope is based on the cooktop specifications and what is found during the assessment.
- Switchboard and supply-capacity assessment
- Dedicated circuit and correctly selected protection where required
- Suitable appliance isolation
- Disconnection and making safe of redundant electrical wiring
- Cooktop electrical connection after physical fitting
- Testing and required electrical compliance documentation
Board work
If the switchboard needs work
We will explain it before the cooktop is connected. Depending on the installation, the next step may involve a switchboard upgrade or investigation through our switchboard support service.
The cabinetmaker or benchtop installer normally handles the cutout and physical fit. We can coordinate timing with them.
How it works
Model check to tested connection
1
Send the details
Provide the cooktop model, suburb, switchboard photo and installation plans.
2
Confirm the scope
We assess the load, supply, wiring route, isolation and any board work.
3
Install the electrical work
The agreed circuit, protection and isolation are installed at the right stage.
4
Connect and test
Once the cooktop is fitted, we connect it, test the work and provide the required documentation.
Related services
Plan the rest of your kitchen electrical work
These pages cover related electrical work, service coverage and warranty information.
Independent information
Official induction and electrical resources
Use these external sources for current NSW induction guidance, household electrification information and electrical compliance requirements.
- NSW Government: Induction cooktops
- NSW Government: Make the switch to electric
- NSW Government: Electrical compliance requirements
- Standards Australia: AS/NZS 3000 Wiring Rules
Always check the chosen cooktop's current manufacturer instructions. Product requirements vary by model and can change.
FAQs
Induction installation FAQs
Can the new cooktop use my existing circuit?
Possibly, but it must be checked against the new appliance requirements. Cable size, protection, isolation, condition and installation method all matter.
Does an induction cooktop need three-phase power?
Not every model does. The answer depends on the appliance specifications, permitted configuration and the home's supply. Send us the exact model before purchase where possible.
Who cuts and fits the benchtop?
The kitchen installer, cabinetmaker or benchtop contractor normally completes the cutout and physical fitting. Russo Electrical handles the fixed electrical work and cooktop connection.
Can you disconnect the old gas cooktop?
Gas disconnection and capping must be completed by a licensed gasfitter. We can coordinate the electrical work around that part of the job.
Is the electrical work covered by a warranty?
Eligible Russo Electrical work is covered under our workmanship warranty. Check the warranty page for the current terms.
Get started
Have the cooktop model ready?
Send the model number, your suburb, a switchboard photo and the planned installation date. We will review the electrical requirements and advise the next step.
Book Quote Now
Online Now