Dark paths and steps
Unlit walkways, steps or driveways can be a trip hazard once the sun goes down.
Garden & outdoor lighting | Gladesville NSW
Garden and outdoor lighting in Gladesville
Good outdoor lighting makes a garden usable after dark and safer to move through. Russo Electrical designs and installs garden and outdoor lighting for Gladesville homes, from a full lighting plan for a new landscape to adding fittings to an existing outdoor area.
On-site design visit
Weatherproof fittings
Testing & documentation
Start with a design visit
Outdoor lighting works best when it's planned around the garden, the paths people actually use and how the space is lived in at night. We visit the property first, then put together a lighting plan and quote before any wiring goes in.
When to consider outdoor lighting
Signs your garden could use better lighting
You don't need a finished plan to get started. If any of the below sound familiar, it's worth arranging a design visit.
Outdoor areas go unused at night
A deck, patio or entertaining area is hard to enjoy after dark without proper lighting.
Ageing or failing fittings
Old outdoor lights, exposed cabling or fittings that are no longer weatherproof should be assessed by an electrician.
No lighting control
Lights left on manual switches only, with no timer, sensor or app control, can be inconvenient and waste power.
What the work can include
Garden and outdoor lighting planned for your property
The right approach depends on the garden, the existing power supply and how you want to use the space. A typical project may include the following work.
Low-voltage garden lighting
Low-voltage systems for garden beds, borders and pathways, run from a dedicated transformer.
Deck, path and step lighting
Fittings positioned to light the areas people actually walk through, without harsh glare.
Feature and uplighting
Uplights for trees, garden beds or architectural features to give the garden depth at night.
Weatherproof outdoor power
IP-rated power points and junctions suited to an outdoor or garden environment.
Sensor and smart controls
Timers, dusk-to-dawn sensors, motion sensors or app-based control added where useful.
Testing and documentation
Circuits are tested before handover, with a Certificate of Compliance for Electrical Work (CCEW) provided where required.
Local work in Gladesville
Garden lighting for Gladesville properties
This completed Gladesville job included replacing four garden spike lights connected to the existing garden-lighting system. The new fittings were secured, connected, tested and aimed to suit the surrounding planting.
- Four garden spike lights replaced
- New fittings connected to the existing system
- Operation and alignment tested before completion
Completed local work
See the Gladesville garden-lighting job
The linked case study documents the specific replacement work and keeps the completed-job evidence separate from this broader service page.
Gladesville case study
Four garden spike lights replaced
See the completed local work, including the existing fitting, replacement installation and verified job scope.
View the Gladesville garden-lighting case study
How the service works
From design visit to handover
We confirm the design and scope before any cabling is run, then complete the installation and walk you through how everything is controlled.
Site visit
Walk the garden and outdoor areas to understand the layout, power supply and what you want lit.
Design and quote
Put together a lighting plan and fitting selection, with a clear quote before work proceeds.
Install and test
Run cabling, fit and position the lighting, then test every circuit before handover.
Handover
Walk you through the controls and provide the relevant completion documentation.
Common questions
Garden and outdoor lighting FAQs
Can outdoor lighting be added to my existing switchboard?
In most cases, yes. The switchboard and existing circuits are checked first to confirm there's capacity, or whether a new circuit or minor board work is needed as part of the job.
What's the difference between low-voltage and mains-voltage garden lighting?
Low-voltage systems run through a transformer and are common for garden beds and path lighting, while mains-voltage fittings are used for some fixed outdoor lighting. The right option depends on the layout and what's being lit.
Do outdoor circuits need safety switch protection?
Outdoor power and lighting circuits need to meet the relevant wiring rules for safety switch protection. This is checked and, where needed, added as part of the work.
Is a compliance certificate provided for lighting work?
For electrical wiring work in NSW, a Certificate of Compliance for Electrical Work (CCEW) is completed and provided where required.
Can the lighting be controlled by timers, sensors or an app?
Yes. Timers, dusk-to-dawn or motion sensors, and app-based smart controls can all be included in the design where they suit how the space is used.
Thinking about garden or outdoor lighting in Gladesville?
Send Russo Electrical a few details about the garden or outdoor area and what you're hoping to achieve. The team can arrange a design visit and confirm the right next step.