Exact model details
Send the model number or specification sheet so the connection method and maximum demand can be reviewed.
Russo Electrical installs induction cooktop circuits for Gladesville houses and apartments. We check your cooktop specifications and switchboard capacity before installing the required circuit, protection and isolation, then connect and test the appliance once the benchtop and cabinetry are ready.

Cooktop requirements vary by model. The rating plate and manufacturer instructions determine the electrical design, while the existing switchboard and wiring in your Gladesville home determine what it can safely support.
Send the model number or specification sheet so the connection method and maximum demand can be reviewed.
We check the available supply, circuit protection and space before recommending the final scope.
An old cooktop circuit is not automatically suitable. Cable size, protection, condition and installation method need checking.
The appliance must have suitable isolation arranged for the model and installation in accordance with applicable requirements.
The opening, clearances and ventilation must match the manufacturer's installation instructions.
If a gas cooktop is being replaced, disconnection and capping must be completed by a licensed gasfitter.
Gladesville has a mix of older freestanding homes, renovated houses and apartment buildings. Each can raise different electrical questions when a gas or older electric cooktop is replaced with induction.
Original switchboards and wiring were not always designed for a modern induction cooktop. We check the board, protection and existing circuit before quoting the connection.
In units, the available supply, where the meter and switchboard sit, and the cable route can all affect the scope. Some work may also need strata approval, so check your building's requirements early.
If the cooktop is part of a larger renovation, the circuit can be roughed in early and the cooktop connected once the benchtop is installed.
We complete induction cooktop electrical work in Gladesville and nearby suburbs including Hunters Hill, Huntleys Point, Putney, Tennyson Point, Boronia Park and Ryde.
The final scope is based on the cooktop specifications and what is found during the assessment.
We will explain it before the cooktop is connected. Depending on the installation, the next step may involve a switchboard upgrade or investigation through our switchboard support service.
The cabinetmaker or benchtop installer normally handles the cutout and physical fit. We can coordinate timing with them.
Provide the cooktop model, your Gladesville address or nearby suburb, a switchboard photo and installation plans.
We assess the load, supply, wiring route, isolation and any board work.
The agreed circuit, protection and isolation are installed at the right stage.
Once the cooktop is fitted, we connect it, test the work and provide the required documentation.
These pages cover related electrical work, service coverage and warranty information.
Use these external sources for current NSW induction guidance, household electrification information and electrical compliance requirements.
Always check the chosen cooktop's current manufacturer instructions. Product requirements vary by model and can change.
Yes. In apartments we check the unit's supply, switchboard location and cable route before confirming the scope. Some buildings also require strata approval for electrical work, so check your by-laws or with your strata manager early.
Possibly, but it must be checked against the new appliance requirements. Cable size, protection, isolation, condition and installation method all matter.
Not every model does. The answer depends on the appliance specifications, permitted configuration and the home's supply. Send us the exact model before purchase where possible.
The kitchen installer, cabinetmaker or benchtop contractor normally completes the cutout and physical fitting. Russo Electrical handles the fixed electrical work and cooktop connection.
Gas disconnection and capping must be completed by a licensed gasfitter. We can coordinate the electrical work around that part of the job.
Eligible Russo Electrical work is covered under our workmanship warranty. Check the warranty page for the current terms.
Send the cooktop model number, your address, a switchboard photo and the planned installation date. We will review the electrical requirements and advise the next step.