Case Study · Lane Cove

Switchboard Replacement in Lane Cove

An ageing ceramic fuseboard replaced with a modern enclosed load centre. After a burning electrical or plastic smell was reported near the existing fuseboard, Russo Electrical replaced it with a white 12-pole switchboard load centre, reconnected the existing circuits and provided a hinged cover and clear labels.

Before and after Lane Cove switchboard replacement, showing an old ceramic fuseboard and a new enclosed 12-pole switchboard with labelled circuits
Before: existing ceramic fuseboard during removal. After: new enclosed switchboard load centre with labelled circuits.
Project overview

Replacing an ageing ceramic fuseboard in Lane Cove

Work requested

Urgent fuseboard attention

Investigate a burning electrical or plastic smell reported near an ageing ceramic fuseboard.

Work completed

12-pole load centre installed

Replaced the ceramic fuseboard, reconnected existing circuits and installed a white enclosed switchboard with a hinged cover.

Result

Labelled and enclosed circuits

New switchboard load centre fitted in the existing cupboard, with clear circuit identification and a protective hinged cover.

01 · The hook

An ageing ceramic fuseboard replaced with an enclosed, labelled switchboard

Following an urgent concern about a burning electrical or plastic smell near an old ceramic fuseboard, Russo Electrical replaced the existing fuseboard with a 12-pole switchboard load centre. The finished board has a white enclosure, hinged cover and clearly identified circuits.

02 · The customer problem

A burning smell near an ageing fuseboard

Urgent attention was requested after a burning electrical or plastic smell was noticed near the existing ceramic fuseboard in a Lane Cove property. The supplied job notes do not confirm the source of the smell or describe any additional damage.

03 · Why they called Russo

Urgent attention for the existing fuseboard

Russo Electrical was contacted to address the ageing ceramic fuseboard after the burning-smell concern. The supplied notes do not specify how the customer found Russo Electrical or whether other electricians were approached.

04 · What Russo proposed

Replace the old fuseboard with a 12-pole load centre

The recorded replacement scope involved removing the old ceramic fuse arrangement, installing a new 12-pole switchboard load centre and reconnecting the existing circuits. The new board would provide an enclosed arrangement with a hinged protective cover and circuit labels.

05 · The process

New switchboard installed in the existing cupboard

The old fuseboard was removed and replaced with the 12-pole load centre in the existing cupboard. The existing circuits were reconnected. The before-and-after photographs document the original ceramic fuseboard during removal and the newly installed white switchboard with its labels and cover.

06 · The outcome

Enclosed switchboard with clearly labelled circuits

The old ceramic fuseboard was replaced with a white enclosed switchboard load centre. Its hinged cover protects the labelled circuit arrangement, making circuits easier to identify. The supplied record does not include a specific installation date, diagnostic cause for the original smell, or detailed test readings.

07 · The takeaway

Burning smells near electrical equipment need prompt assessment

A burning or overheated-plastic smell near a fuseboard is a warning sign that requires attention from a licensed electrician. This Lane Cove project replaced the ageing ceramic fuse arrangement with an enclosed, labelled switchboard, without assuming the original smell’s cause.

Before and after

Ceramic fuseboard replaced with a modern load centre

The original project image shows the existing fuseboard during removal alongside the completed enclosed switchboard installation.

Original before and after photographs of an old ceramic fuseboard and new labelled switchboard in Lane Cove
BEFOREAFTER
Before: existing ceramic fuseboard during removal. After: new 12-pole switchboard load centre with a hinged cover and labelled circuits.
Customer questions

Questions about replacing an old fuseboard

Why was this Lane Cove switchboard replacement requested urgently?

A burning electrical or plastic smell had been reported near an ageing ceramic fuseboard. The supplied job notes do not confirm what caused the smell.

What replaced the existing ceramic fuseboard?

A new 12-pole switchboard load centre with a white enclosure, hinged protective cover and clearly labelled circuits.

Were the existing circuits reconnected?

Yes. The recorded scope states that the existing circuits were reconnected to the new switchboard load centre.

Was the new switchboard installed in the same cupboard?

Yes. The finished switchboard was installed in the existing cupboard.

What should I do if I notice a burning smell near my switchboard?

Keep clear of the switchboard and arrange urgent assessment by a licensed electrician. Do not touch hot or damaged electrical equipment. If you see smoke, flames or immediate danger, leave the property and call 000.

Can Russo Electrical help with a switchboard replacement in Lane Cove?

See our guide to switchboard defects and safety, or request a booking to discuss a replacement.

Get started

Need a switchboard replacement in Lane Cove?

Concerned about an ageing fuseboard or a burning smell near your electrical equipment? Contact Russo Electrical to discuss the next steps and a quote.