Case Study · Greenwich

Switchboard Upgrade in Greenwich

How a Greenwich rental gained individual circuit protection.

Repeated power tripping led to the replacement of an old ceramic fuseboard with a new eight-pole switchboard load centre, with an individual RCBO protecting each circuit.

SERVICED BY RUSSO ELECTRICAL TEAM
Russo Electrical team
Project overview

Replacing an old ceramic fuseboard at a Greenwich rental

The problem

Power kept tripping

The property manager needed assistance with repeated power tripping, including assessment of whether repairs were the landlord’s responsibility.

The solution

New eight-pole load centre

We replaced the ceramic fuseboard in the same cupboard, fitted a new main switch and installed an individual RCBO on each circuit.

The result

Individual circuit protection

Lighting, power, wall oven and hot water circuits now each have their own RCBO in the clearly labelled board.

01 · The problem

Repeated power tripping at a rental property

The power kept tripping at this Greenwich rental. The property manager asked Russo Electrical to find the cause, advise whether the repair was the landlord’s responsibility, and put it right. The home still had an old ceramic fuseboard.

02 · How we fixed it

An eight-pole switchboard with an RCBO on every circuit

We removed the old ceramic fuseboard and installed a new eight-pole switchboard load centre in the same cupboard. The new board includes a main switch and an individual residual current circuit breaker with overcurrent protection (RCBO) on every circuit.

We then tested the new switchboard, labelled each circuit and commissioned it. For broader electrical safety information, see the NSW Government’s home electrical safety guidance.

03 · The result

Clearly labelled circuits and more targeted fault isolation

The rental property now has an enclosed, clearly labelled switchboard. The lighting, power, wall oven and hot water circuits are each protected by their own RCBO.

With individual RCBOs, a fault affecting one circuit can generally be isolated without shutting off other unaffected circuits. This also makes future fault finding more straightforward. Read more about our local services on the Greenwich electrician page.

Old and new

From ceramic fuses to individual RCBO protection

These original project photographs show the removed ceramic fuseboard and the new enclosed switchboard.

Old Greenwich ceramic fuseboard after removal alongside the newly installed switchboard with RCBOs
OLD FUSEBOARD (REMOVED)NEW SWITCHBOARD
The old ceramic fuseboard after removal. The new switchboard with an RCBO on every circuit.
Customer questions

Questions about switchboard upgrades in Greenwich

Why was Russo Electrical called to this Greenwich rental?

The property manager reported repeated power tripping and requested investigation, advice about repair responsibility, and a solution.

What replaced the old ceramic fuseboard?

A new eight-pole switchboard load centre with a new main switch and individual RCBO protection on every circuit.

Which circuits received RCBO protection?

The new board provides individual RCBO protection for lighting, power, wall oven and hot water circuits.

What is the benefit of individual RCBOs?

When a fault occurs on one circuit, its RCBO can disconnect that circuit while leaving unaffected circuits supplied, making fault isolation simpler.

Who is responsible for electrical repairs in a NSW rental?

Responsibility depends on the circumstances and applicable tenancy obligations. See NSW Government rental information for general guidance; the supplied job record does not document the final responsibility determination.

Can Russo Electrical help with a Greenwich switchboard upgrade?

Yes. Explore our Greenwich electrical services or request a booking for a quote.

Power tripping or an old fuseboard in Greenwich?

Contact Russo Electrical for a quote.